Ask MetaFilter. We are purchasing a brand new refrigerator to use the “Cash for Clunkers for Appliances” program.

We are investing in a fridge that is new make use of the “Cash for Clunkers for Appliances” program.

Brand New refrigerator we would like posseses an ice manufacturer, which demonstrably (right?) is certainly going to need a water hookup which our present suck-ass Magic Chef will not. Exactly how much of an issue (in work and expense; we are in Brooklyn, NY) can it be to set up a hookup that is new? It is close to our drain, therefore the pipelines should there be right.

If, for reasons uknown, it isn’t practical to obtain the job done, can there be any explanation we could not simply connect within the refrigerator sans-ice manufacturer, and later hook it up?

you ought to be able to download the manual on the web. Observe how the directions read.

We suspect it is as easy as placing a T adult friend finder on the cool water line and managing a tiny synthetic hose towards the back regarding the refrigerator. but. IANAP posted by HuronBob at 2:42 PM on February 11, 2010

Residence Depot offers a kit with this. It is simply only a little needle thing that taps into the current pipe. I do believe it is a kit that is slightly different on when you have copper or PVC.

Yeah, then drill a hole in the cabinet to run the line if the fridge is going in right next to the sink, I would use a saddle valve on the cold line to the sink. You need to be able to perform most of the work (aside from drilling the opening) with fundamental hand tools plus some good judgment.

1) If you haven’t really bought yet, I would like to emphatically endorse investing in a model because of the fridge regarding the base. It really is Hence really nice obtaining the meals you access most there be right up right in front of the face.

2) setting up an ice maker line must not be way too hard. My hubby recently changed ours out from a copper line to 1 of the lines that appears like a fuel pipe (bendy and much more durable because our copper line developed a kink inside it and leaked). With regards to the style of line you employ, you may need to make numerous, numerous batches of ice because you can “taste” the plastic or whatever the line is made of that you throw away. Maybe perhaps Not a problem, merely a pain that i decided to warn you about. published by wwartorff at 3:26 PM on 11, 2010 february

“If, for reasons uknown, it is not practical to obtain the work done, can there be any explanation we could not simply connect within the refrigerator sans-ice manufacturer, and later hook it up? “

No issue just just exactly what therefore ever; just be sure you Ice Maker is within the off place so it doesn’t cycle most of the kind.

jon1270 writes ” For the ice maker, a seat valve ought to be enough.”

Saddle valves are virtually fully guaranteed to leak sooner or later as time goes by; particularly under a sink where they truly are afflicted by technical harm. Better is either a Compression Tee/Quick tee adaptor or a shut down valve with two ports when you can find one which fits your chilled water sink shutoff. Either could be set up with only a couple of wrenches and perchance a pipe cutter.

The ice maker install kits will include either synthetic or copper tubing. The copper tubing is much more costly but less likely to want to be catastrophically damaged. You can when you run the line drill the hole in the cabinet as close to the floor and wall as. Then make a sizable complete cycle in the tubing (roughly because big across because the width of this refrigerator; 5-7′ of line) before connecting the finish regarding the tubing into the water valve from the refrigerator. The cycle will lay flat resistant to the wall behind the refrigerator and enable you to definitely pull the fridge out of the wall surface without damaging the tubing. Make certain you utilize the clamp that accompany the kit to attach the tubing to your refrigerator near it is valve and so the valve doesn’t get damaged.

When your water contains appreciable sediment (look for mud into the base of one’s lavatory tank) as well as your refrigerator additionally dispenses cool water then you definitely should install an inline sediment filter. Otherwise that muck leads to the cold dish that chills the water. posted by Mitheral at 3:44 PM on February 11, 2010 [2 favorites]

First thing you have to do would be to look underneath the sink to check out which type of supply would go to the water that is cold. When it is a body that is valve versatile lines operating up, verify that the threads at the top are standard half inch pipeline threads. In that case, it is possible to unscrew water line to your sink and install a straightforward tee over the valve, re-install the water line and then install the kit-based line into the refrigerator. Needless to say you shall have turned water off before unscrewing anything. Appropriate?

Simply just just Take a mobile phone picture of what is beneath the sink and show it to your plumbing work “expert” in the home Depot or Lowes and s/he can explain to you all the goodies you will need. As is noted above, the most difficult component is drilling for the line through the case and that is actually no big deal. We elect to drill only a little bigger hole than is necessary therefore feeding the ice-maker line through is only a little easier. Additionally, drill this hole dating back to feasible, so that the line does not interfere utilizing the material you retain into the cabinet. published by Old Geezer at 4:40 PM on February 11, 2010